Table of Contents
Advertisement
Instructions for Use
(continued)
PC Program Config
(continued)
Measurements without Show All Values
In Figure IS-07 you can see the output of the measurements without the check-mark at Show All Values.
(Note: Show All Values is explained later in this section)
The blue fields on top of the window are the current measuring values. In addition, all current measure-
ments are shown in the table sorted by the time they were recorded.
You can choose the measuring values you want to see by activating SELECT. The values Refractive In-
dex, Temperature, Brix or Scale can be displayed.
Figure IS-07, Measurements without Show all Values
1400700-101 Rev. A
23
Advertisement
Table of Contents
