Table of Contents
Advertisement
Instructions for Use
PC Program Config
Calibration
The modification of the Calibration Slope and Calibration Offset settings are reserved for Reichert ser-
vice. If you would like to edit them, request assistance from Reichert first. The Slope option changes the
angle of the calibration curve and Offset changes the amplitude of the y-axis (height) calibration curve.
Calibration Data
All relevant data of the calibration is displayed here.
28
(continued)
(continued)
Figure IS-15, Module Calibration
Figure IS-16, Calibration Data
-continued-
1400700-101 Rev. A
Advertisement
Table of Contents
