Table of Contents
Advertisement
Instructions for Use
(continued)
PC Program Config
(continued)
Peltier
It is possible to edit the parameters and the speed of the fan of your built-in peltier thermostat. Please
contact the Reichert – Service before you try to edit these settings.
Figure IS-25, Configure Peltier
Save Data
You have the opportunity to save your edited data. You can SAVE them on your AR5 and configure the
device in this way. It is also possible to save the configuration file, so you can LOAD it at a later date.
Figure IS-26, Save Data
1400700-101 Rev. A
33
Advertisement
Table of Contents
