Instrument Setup
Connections
The AR5 measuring head offers the following interfaces at the rear side:
1. Power Supply
2. Connection Port to AR5 Display
3. Serial Interface RS232
Installation
Connecting the AR5 to the Computer
Connect the delivered serial cable with the serial port at the AR5 measuring head. Refer to Figures IS-01
and IS-02.
Connect the other end of the cable with the serial port of your PC.
Connecting the AR5 to the Power Supply
Connect the mains adapter to an electrical socket.
Connect the mains adapter to the black colored port on the AR5 measuring head. Refer to Figures IS-01.
The AR5 display AR5 control unit will automatically be powered after connecting it with the measuring
head.
1400700-101 Rev. A
1
Figure IS-01, AR5 Measuring Head Ports
Figure IS-02, Serial Cable AR5
2
3
17