Table of Contents
Advertisement
10.10 Load from the device
10.10.1 Automatic load from the device
The current measurement of the test file gets an ID while saving during
measurement. This ID is identical with the ID of the measurement saved on the
device which is online.
The results are loaded automatically from the device to the corresponding
measurement in the test file as far as the measurement ID of the test or the
backup file is the same as the ID of the measurement saved on the device.
Otherwise the results can be loaded manually.
Note: Only the results and not the setting are loaded from the device.
10.10.2 Manual load from device
The results can be manually loaded from the device to a selected measurement
in the test file by using the Load from device command on the Test view ribbon.
Note: Because only the results and not the setting are loaded from the device,
ensure that the settings in the test file are the same as those used for the
measurement results saved on the device.
from the device to a selected me
evice command on the Te
command on
rom device
ults and not the setting are loade
not the setting
n the test f
est file are the same as tho
ile are the sam
aved on the device.
n the device.
SPECTANO Analyzer Suite
ing
saved on the
e corresponding
sponding
ID of the test or the
e test or the
saved on the device.
the device.
oaded from the device.
from the devic
vice to a sele
o
61
Advertisement
Table of Contents
