Omicron Lab SPECTANO 100 User Manual page 56

SPECTANO 100 User Manual
54
Table 10-12 Air reference settings (continued)
Data
Pre-measurement checks
Check for noise and
connectivity problems
Delay the start of the measurement until
The depolarization current
falls below
The time elapsed
1. For the specified geometry of the electrodes, SPECTANO Analyzer Suite calculates the vacuum
capacitance automatically. If you select Others in the test cell settings, enter the vacuum
capacitance manually.
2. Only available for the PDC and combined measurement modes selected in the sweep settings
under Measurement type.
pe.
3. Only available for the FDS and combined measurement modes selected in the sweep settings FDS and combined
under Measurement type.
nt type.
The following table describes the measurement settings. g table describes the measureme table describes the me
Table 10-13 0-13 Measurement settings Measurement settings Measurement se
Data
General measurement settings surement
Temperature Temperature per
Humidity Humidity Humidity
Material sa Material sample settings
Material kind Material kind Material ki
Serial numbe Serial number erial
Sample thickness
1
Sample thickness (h) Samp
2
P Position A
2
Position B
2
Position C
2
Position D
2
Position E
2
Average (h)
2
Max. uniformity
Description
Select the
Check for noise and connectivity problems
check box to check for noise and connectivity
problems before starting a test.
2
Select this option and enter the threshold
depolarization current to delay the start of the
measurement until the depolarization current falls
below the threshold. old.
Select this option and enter the time limit to delay ption and enter the time limit to d nd enter the time l
the start of the measurement until the time limit the measurement until the time surement until th
elapsed. .
ctrodes, SPECTANO Analyzer Suite
SPECTANO Analyzer
u select Others Others in the test cell settin
and combined mbined measurement modes se measurement m
mbin measurement mod surement mo
Description
Temperature of the test cell/sample
Environmental relative humidity
Kind of the material sample
Serial number of the material sample
Thickness of the material sample
Sample thickness at position A
Sample thickness at position B
Sample thickness at position C
Sample thickness at position D
Sample thickness at position E
Average thickness of the material sample
Accuracy of the sample uniformity
oblems
nnectivity ty
ter the threshold ter the threshold
to delay the start of the o delay the start of the
he depolarization current falls polari
ca
tes