Table of Contents
Advertisement
In this case, both air reference measurements have to be performed. If you click
Air space height
the Air reference correction I/0 button
is not equal to the
results and thus the permittivity, tan and the impedance results of all
sample thickness
measurements displayed in the navigation pane will be corrected by using linear
interpolation of the air reference measurement results. By interpolating the
results, an approximate value of c
10.5
Perform analysis
To perform an analysis, use the analysis macros provided by OMICRON Lab
available at www.omicron-lab.com.
10.6
View measurement results
This section describes the workspace for viewing of measurement results. To
open the result view workspace, click Graph and result table under
Air reference measurement(s) or Material measurement(s) in the Navigation
pane.
Figure 10-5
The result view workspace displays measurement results numerically as well as
graphically. On the right, the workspace provides controls for displaying the
results.
(t) for the actual sample thickness h is found.
u
for viewing of measurement resu
ck Graph and result table
or Material measurement(s)
erial measurement
Result view workspace
SPECTANO Analyzer Suite
on the ribbon, the capacitance
ded by OMICRON Lab
MICRON Lab
ng of measureme
unde
nd result tab
in t
linea
g the
s h is found. d.
47
Advertisement
Table of Contents
