Table of Contents
Advertisement
10
SPECTANO Analyzer Suite
In this chapter you will learn how to test dielectric materials with SPECTANO
Analyzer Suite and manage the test data. The chapter is structured as follows:
•
•
•
•
•
•
10.1
Start view
After starting SPECTANO Analyzer Suite, the start view opens. In the start view,
you can select different user tasks designed to support you during diagnostic
testing of dielectric materials and management of test data.
Figure 10-1
Section 10.1 "Start view" later in this chapter gives you an overview on the
SPECTANO Analyzer Suite start view.
Section 10.2 "Create a new test" on page 41 describes the workflow for
creating a new test.
Section 10.4 "Perform air reference measurements" on page 44 explains
how to correct the measurements to improve the accuracy of the
measurement results.
Section 10.5 "Perform analysis" on page 47 is about performing an analysis
of the measurement results.
In 10.6 "View measurement results" on page 47 you will find a detailed
description of the result view workspace.
Finally, in 10.7 "Settings" on page 51, all SPECTANO Analyzer Suite
settings are described in a nutshell.
ANO Analyzer Suite, the sta
PECTANO Analyzer Suite
ct different user tasks
ct different user tasks desi
dielectric materials and manage
lectric materials and m
SPECTANO Analyzer Suite start view
SPECTANO Analyzer Suite
he accuracy of the
e accuracy of the
47 is about performing an analy
bout performing a
s" on page 47 you will find a det
ge 47 you will find
orkspace.
n page 51, all
51, all SPECTANO Analy
SPECTANO
a nutshell.
ell.
gned
ANO
s follows:
ws:
erview on the
the workflow for
orkflow for
ts" on page 44 explains
e 44 explains
39
Advertisement
Table of Contents
