Table of Contents
Advertisement
SPECTANO 100 User Manual
6
Device description
6.1
SPECTANO 100
6.1.1
Connectors and operating controls
16
DANGER
Death or severe injury caused by high voltage or current
Do not touch the OUTPUT connector when the red LED is on or blinks.
Always ensure that no dangerous voltages are present at any touchable
part of the device.
Before handling SPECTANO 100 in any way, connect its equipotential
ground terminal with a solid connection of at least 6 mm
the ground terminal in the laboratory.
OUTPUT connector
Measurement voltage: 200 V
Max. continuous output current: 50 mA
Max. output frequency: 5 kHz
Red LED
LED
See Table 6-1 "Signal LEDs"
able 6-1 "Signa
on page 17
on page 17
Figure 6-1
Figure 6-1
Figure 6-1
SPECTANO 100 front view
SPE
peak
STOP button
OP button
peak
peak
Stops measurements
tops measu
Green LED
See Table 6-1 "Signal LEDs"
on page 17
red LED is on or blinks.
esent
cha
y, connect its equ
2
t least 6 mm cro
cross-section to
INPUT connector
Yellow LED
See Table 6-1 "Signal LEDs"
on page 17
Advertisement
Table of Contents
