Typical Setup For A Test Cell Without Guard Ring - Omicron Lab SPECTANO 100 User Manual

Hide thumbs Also See for SPECTANO 100:
Table of Contents

Advertisement

To connect SPECTANO 100 to a test cell with guard ring:
1. Ground SPECTANO 100 according to the safety rules (see 2.2 "Five safety
2. Connect the standard triaxial cable according to the color code to the
3. Depending on the test cell connection (BNC or 4 mm plug), connect one of
4. Connect the adapter cables to the test cell with guard ring according to the
Note: If you are using the triaxial-to-4 mm plug adapter cable, be aware that the
inner shield (guard) and the outer shield (ground) are not connected.
For more information and example connections to different types of test cells,
see "Appendix" in the SPECTANO 100 User Manual.
9.4.2

Typical setup for a test cell without guard ring

rules" on page 6).
SPECTANO 100 OUTPUT and INPUT connectors:
• Red-labeled cable to the OUTPUT connector
• Blue-labeled cable to the INPUT connector
the adapter cables described earlier in this chapter with the corresponding
color code to the standard triaxial cable:
• Red-labeled adapter cable to the red marked standard cable
• Blue-labeled adapter cable to the blue marked standard cable
schematic diagram.
PECTANO 100 User Manual.
a test cell without guar
t cell without gua
DANGER
Death or severe injury caused by high voltage or current
ere injury caused b
Do not touch the OUTPUT connector when the red LED is on or blinks.
touch the OUTPUT
Always ensure that no dangerous voltages are present at any touchable
ensure that no
part of the device, test cell or sample.
he device, t
Do
Do not touch the output if the guard (inner shield of the triaxial connection)
is identical with the ground (outer shield of the triaxial connection).
s identical w
rked standard cable
e marked standard cable
st cell with guard ring according
with guard ring ac
o-4 mm pl
m plug adapter cable, be a
ug adapter cab
ter shield (ground) are not conn
eld (ground) are no
example connecti
e connec ons to different
to
ANO 100 User Man
Installation
he
plug), connect one of
connect one of
r with the corresponding
correspondin
stand
ed standard cable
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dts1

Table of Contents