Table of Contents
Advertisement
Table 6-1
Signal LEDs
LED
State
Green
On
Yellow
Blinking
On or
blinking
Blinking
Red
On for
approx.
prox.
10 s
0 s
Description
Signals that the power switch is on.
Signals the input activity:
•
Measurement results are available in
SPECTANO 100 which are not saved.
(This can happen when the computer is
disconnected from SPECTANO 100 after the
measurement was started.).
s started.).
•
An error has occurred during measurement
occurred during measurement
(Measurement is stopped.). After a computer
ment is stopped
stopped.). After a comput
has been connected to SPECTANO 100, the
n connected to
ected to SPECTANO 100
error information is sent to the computer and
nformation is sent to the compu
on is sent to the c
the LED is on.
LED is on.
Signals dangerous voltage on the OUTPUT
nals dangerous voltage on the
angerous voltage on
connector.
connector.
or.
A measurement is running.
A measurement is running.
measurement is run
The test object is being d
The test object is being depolarized after a
he test object is be
measurement has bee
measurement has been stopped by SPECTANO
easurement has be
Analyzer Suite, manually or due to an error.
Analyzer Suit , man
Analyzer Suite
Device description
ailable in n
e not saved.
saved.
n the computer is
mputer is
100 after the
after the
PECTANO 100
0 0
start
during meas
.). After a c
SPECTA
O
17
Advertisement
Table of Contents
