Table of Contents
Advertisement
3-2. Print Flow
Print start (Fig.1)
Paper feed
Plunger OFF
Shifts the head to the tray position. (Fig.2)
Transports the paper (to PJ sensor and capstan).
Shifts the head to the media transport position.
(Fig.3)
Removes the ribbon slacking.
Transports the paper
(to PE sensor and standby position). (Fig.3)
Ribbon [Y] sensing
Printing preparation
Head TEMP
Head TEMP
Cooling operation due to the
and Inside
and Inside
head TEMP and inside TEMP.
TEMP check
TEMP check
Transports the paper
(to the print start position for each print size).
3-2 (E)
Print
(Repeat in YMCL)
Shifts the head to the print position. (Fig.4)
Print a color. (Ribbon feed and paper transport)
Shifts the head to the media transport position.
(Fig.5)
Removes the ribbon slacking.
Transports the paper and senses the ribbon head.
Paper eject
Transports the paper to the cut position.
First cut
Transports the paper to the cut position.
Ribbon [Y] sensing
Second cut
A
UP-CX2
Advertisement
Table of Contents
