Initialization Of Print Count History 00.00 - Sony UP-897MD Service Manual

2-5. Initialization of Print Count History
After replacing the thermal head, perform the initialization of print count history.
¢ Input signal: None None
* Set the switch to ON while
pressing the and
buttons.
* When pressing the jog dial two times,
"SVC" and "PATAN?" are displayed in
order. Rotate the jog dial in this state to
display "RESET" and press the jog dial.
"R:MENU" is displayed and rotate the Check that "RESET" is displayed.
jog dial. After displaying the "R:H.PRN",| The initialization of print count history is
then press the jog dial. completed (count becomes "0").
UP-897MD 2-5