1-4-5. Door Panel (C2) Assembly
1. Remove the top panel (C2) assembly. (Refer to Section 1-4-1.)
2. Remove the side panel (R) assembly and side panel (L). (Refer to Section 1-4-2.)
3. Remove the inner cover (front) assembly. (Refer to Section 1-4-4.)
4. Remove the door panel (C2) assembly from the two
shafts of the door fulcrum plate subassemblies in the
direction of the arrow.
5. To install, reverse the removal procedure.
1-6 (E)
Door fulcrum plate
subassembly
Door panel (C2)
assembly
Shaft
Shaft
Door fulcrum plate
subassembly
UP-CX2