Write Of Firmware - Sony UP-CX2 Service Manual

2-5-2. Write of Firmware

Tools
. Personal computer (PC)
. USB cable (Type B 5 Type A)
. Update module: cx2fxxx.exe ("xxx" indicates the version number.)
m
. For obtaining the latest module, please contact your local Sony Sales Offi ce/Service Center.
. Be sure to use the update module for UP-CX2. When the update module for another model is used, it
may cause malfunction of this unit.
n
Refer to the "Sony digital photo printer page" below for the latest information of fi rmware and a printer
driver.
Japanese: http://www.sony.co.jp/Products/DP-driver/index.html
English: http://www.sony.net/Products/DP-driver/index.html
Procedure
1. Connect PC to the USB connector (CN500 on the MA-140 board) on the rear panel of this unit using
a USB cable.
Rear side of main unit
CN500/MA-140 board
2. Turn on the power of equipment.
3. Double-click the update module in PC and start it.
4. After that, operate according to the screen of the update module.
n
It takes about one minute to write fi rmware. Be sure to keep the power during write operation because
PC restarts after write is completed. This unit will fail to recover and the replacement of the MA-140
board will be required if the power is turned off halfway.
2-14 (E)
UP-CX2