Table of Contents
Advertisement
PAPER LOAD ERROR
Detection block: PE sensor (PE-42/43 board) and PJ sensor (PE-44 board)
Contents:
Jamming occurred during paper load.
Possible cause 1: Print paper jamming
Possible cause 2: Defective or dirty PE sensor (PE-42 board) and PJ sensor (PE-44 board)
Possible cause 3: Dirty or worn roller for transporting print paper or defective block around a roller
Possible cause 4: Defective stepping motor or drive block
PAPER EJECT ERROR
Detection block: PE sensor (PE-42/43 board), PJ sensor (PE-44 board), and cutter position right/left
detection switch (cutter unit)
Contents:
During paper eject, jamming occurred or paper was not correctly cut.
Possible cause 1: Print paper jamming
Possible cause 2: Defective or dirty PE sensor (PE-42 board) and PJ sensor (PE-44 board)
Possible cause 3: Dirty or worn roller for transporting print paper or defective block around a roller
Possible cause 4: Defective stepping motor or drive block
Possible cause 5: Cutter unit-related defects
Detail 1 display
PAPER FEED
Contents: Paper transport in progress during paper feed or eject
RIBBON FEED
Contents: YMCL sensing of ribbon in progress
PRINT Y/M/C/L
Contents: Y/M/C/L print in progress
n
Ribbon FG is judged to be defective (ribbon exhaustion) when PRINT Y and FG SENS of
Detail 2 is combined.
PAPER CUT
Contents: Cutter position initialization in progress during mechanical reset
HEAD POS
Contents: Head position movement in progress
The position during movement can be discriminated by HP TO HOME, HP TO TRAY, HP TO
MEDIA, or HP TO PRINT of Detail 2.
6-8 (E)
UP-CX2
Advertisement
Table of Contents
