Table of Contents
Advertisement
| certing stort
Getting Started
Inserting the ink (print cartridge)
wy
Insert the print cartridge firmly
and close the cartridge
compartment lid.
Insert the video print cartridge with the we VP mark
| according to the steps below.
If the cartridge compartment lid
| Use only the video print cartridge supplied with the
does not
close
| video print paper packed in the same carton.
—
Remove the print cartridge, and then reinsert it.
| \
OCaution
.
4
Never put your hand into the cartridge
\
While pressing down
the lever,
compartment. The thermal head reaches
put)
open
the cartridge compartment
high temperatures, especially after
lid.
repeated printing.
Notes
¢ When you put the print cartridge
down, stand it as illustrated so that
dust will not get on the ink ribbon.
¢ Do not touch the ink ribbon or place
the print cartridge in a dusty location.
Side of the unit
Fingerprints or dust on the ink ribbon
may result in imperfect printing.
2
Wind up the ink ribbon to remove
the slack.
Remove any slack (@).
Then, while pressing the center of
the reel, wind the ink ribbon until
the black bar appears on the left
(@).
4
Getting Started
Advertisement
Table of Contents
