2-1. Operation during Replacement of Parts
In this unit, parts that must be adjusted after replacement of parts are as follows:
. Thermal head:
Adjusts the voltage and position.
. Ribbon drive assembly: Sets the ratio of takeup tension.
. DC fan (for inside):
Resets the history of fan rotation.
. MA-140 board:
Copies various information items stored in nonvolatile memory.
The adjustments are mainly performed using the service mode. Refer to "Section 5 Service Mode" for the
service mode.
m
. Perform each operation in order according to the procedure.
. Use media 2UPC-C55 to print a test pattern.
. For upgrading the fi rmware, refer to section 2-5-2.
UP-CX2
Section 2
Adjustment
2-1 (E)