1-6-10. Paper Drive Roller
n
When replacing the paper drive roller, platen roller, capstan roller or pinch roller, be careful not to touch it
with bare hands or dirty gloves. When the roller is contaminated, clean it with ethyl alcohol.
1. Remove the cabinet. (Refer to Section 1-4.)
2. Remove the screw and four hooks, then remove the
inner cover (L) in the direction of the arrow.
3. Remove the screw and four hooks, then remove the
inner cover (R) in the direction of the arrow A.
4. Remove the inner cover (U) from the two portions A of
the return guide shaft in the direction of the arrow B.
UP-CX2
Inner cover (L)
Hooks
BVTT
3 x 6
Return guide shaft
Inner cover (U)
Inner cover (R)
BVTT
3 x 6
Portions A
B
A
Hooks
1-19 (E)