To be allowed to access to a function of the power source, the user must have a level higher or equad level of rights superior or equal to the level of rights

access associated to the function.

The access right of every function can be consulted and modified in the management page:

Configuration > User management > Right Management

List of the functions which the profiles modify for the access rights:

Name of the access right

Program limitation

Process control

User synergy

Striking adjustment

Program list activation

MIG 4T Program list activation

Program management

Program selection

Traceability

Configuration

Maintenance

Setup

Calibration

User management

User management:

The first user profile must be a profile Administrator with a password. The profiles Technician and Welder are unaccessible when the first profile has not

been created. A welder profile can be created without a password, it then becomes the default user if no idenfitication is done.

keep your Administrator's password carefully.

Lost password? Please contact your reseller or the After Sales Services.

USER IDENTIFICATION

From the home page, the button «

User identification:

Allow or deny access to the different functions of the power source depending on the profile.

Set down in the generated trace files the name of the identified user.

To be identified as a user, select the desired user, validate and write your password if needed

Modify user's password

Log out the current session

Create a user profile from the profile associated with the USB key. The insertion of the USB key causes automatic user's identification.