Selection And Gestion Des Programmes De Soudage - Air Liquide SAF-FRO DIGIWAVE II Instruction For Operation And Maintenance

4.3. SELECTION AND GESTION DES PROGRAMMES DE SOUDAGE

This page is accessible from the homepage, it gives an overview of the available programs (except masked programs). To load a program from this page,
select the program and press OK.
PROGRAM MANAGEMENT PAGE
La page de gestion des programmes permet une gestion élaborée des programmes de soudage. Elle est donc distincte de la page de sélection pour
pouvoir limiter son droit d'accès.
In addition to actions already presented - Backup, Restore, and Load - program management can:
Suppress a program:
Mask a program:
Lock a program:
Action on all the programs:
To remove the mask or the lock on a program, select Unmask or Unlock.
DIGIWAVE II
Program Management
MIG 4T Program Lists
Program Lists
Preview of selected program
1 Number of the program
2 Name of the program
3 Welding process of the program (MIG, TIG, MMA)
4 Wire speed (MIG) / Current (TIG & MMA)
5 Status of the program
Suppress the program, the associated number becomes vacant.
Mask the program from the program selection page, the program is only accessible to users who have the
right access to the program management
Lock the synergic parameters of a program. The only settings you can modify from the welding tuning
page are the main welding parameters.
The action is made on all the concerned programs.
23