Air Liquide SAF-FRO DIGIWAVE II Instruction For Operation And Maintenance page 22

Create a program
To create a program, press on
Select the number of the created program
Then call the program (if necessary, see step 3 of the first HMI configuration)
You cannot create a program in these three different cases:
- If a program list is activated.
- If the user doesn't have the right of program management.
- If a limitation on the current program is activated.
Save a program
Once a setting modification is done on a created program, the symbol
To save the modifications, press on
To cancel the modifications done since the last save, select "Restore" and press on OK.
Rename a program
To rename a program, press on
Note: This function will not backup any changes
Load a program
To load a program already created, press on
You can also load programs from the page of welding programs selection.
Copy a program
To copy a program, load the program you want to copy, and then create a new program from the one loaded.
22
and select "Create program" then press on OK
select "Save program", then press on OK and the symbol
select « rename a program », then press OK
. With the button
appears meaning that the modification can be saved.
, select the program you want to load in the list of created programs puis OK.
will disappear.
DIGIWAVE II