Safety Instructions; Explanation Of Safety Instructions; General - Fronius Robacta Reamer X-Line J Operating Instructions Manual

Safety Instructions

Explanation of
Safety Instruc-
tions
Indicates an immediate danger.
▶
Indicates a possibly dangerous situation.
▶
Indicates a situation where damage or injury could occur.
▶
NOTE!
Indicates the possibility of flawed results and damage to the equipment.

General

The device has been manufactured using state-of-the-art technology and according to
recognized safety standards. If used incorrectly or misused, however, it can cause
-
-
-
All persons involved in the commissioning, operation, maintenance, and servicing of the
device must
-
-
-
The Operating Instructions must always be at hand wherever the device is being used. In
addition to the Operating Instructions, all applicable local rules and regulations regarding
accident prevention and environmental protection must also be followed.
All safety and danger notices on the device must
-
-
-
-
For the location of the safety and danger notices on the device, refer to the section
headed "General" in the Operating Instructions for the device.
Before switching on the device, remove any faults that could compromise safety.
Your personal safety is at stake!
DANGER!
Death or serious injury may result if appropriate precautions are not taken.
WARNING!
Death or serious injury may result if appropriate precautions are not taken.
CAUTION!
Minor injury or damage to property may result if appropriate precautions are not
taken.
injury or death to the operator or a third party,
damage to the device and other material assets belonging to the operating com-
pany,
inefficient operation of the device.
be suitably qualified,
have knowledge of automated welding and
have read these Operating Instructions and any system component operating
instructions in full and follow them carefully.
must be kept in a legible state
not be damaged/marked
not be removed
not be covered, pasted, or painted over
5