Fitting The Cleaning Cutter - Fronius Robacta Reamer X-Line J Operating Instructions Manual

Fitting the Cleaning Cutter

Fitting the clean-
ing cutter
Burning hazard due to hot cleaning cutter as a result of operation.
This can result in severe burns.
▶
Danger from incompatible wearing parts.
This can result in damage to property and malfunctions.
▶
The cleaning cutter is not part of the scope of supply. Find the right cleaning cutter in the
manufacturer's Spare Parts List.
1
2
1
3
CAUTION!
Before handling the cleaning cutter, allow it to cool to room temperature (+25°C,
+77°F).
CAUTION!
Only use the device manufacturer's contact tips, gas nozzles and cleaning cutters.
No liability is accepted for damage caused by the use of contact tips, gas nozzles or
cleaning cutters from third-party manufacturers.
Remove the protective cover from the cleaning device
2
Mount the protective cover on the cleaning device so that it is in its original position
once again
35