General; Principle; Functionality Of The Cleaning Device; Applications - Fronius Robacta Reamer X-Line J Operating Instructions Manual

General

Principle

Functionality of -
the cleaning
device -
-

Applications

The cleaning device is exclusively suited for operation in automation and robot applica-
tions and can be used for a range of materials.
Main applications:
-
-
-
-
-
Warning Notices The cleaning device has warning notices and a rating plate fitted. These warning notices
on the Cleaning and the rating plate must not be removed or painted over.
Device
The gas nozzle clamping device on the front of the cleaning device holds the gas
nozzle in place during the cleaning process
A cleaning cutter is used for cleaning
After cleaning, the parting-agent injection nozzle parting agent is sprayed into the
gas nozzle and onto the face of the gas nozzle
Automotive and supply industry
Equipment engineering
Chemical plant construction
Mechanical engineering, rail vehicle construction
Construction machinery and special-purpose vehicle construction
The cleaning device is intended to auto-
matically clean MIG/MAG welding torches.
The cleaning device can be used to reli-
ably clean the inside of gas nozzles and
the face of the gas nozzles in a range of
welding torch geometries. This signific-
antly increases the service life of wearing
parts. At the same time, the even applica-
tion of parting agent prevents the build-up
of new dirt.
13