Personal Protection And Protection Of Others; Emc Device Classifications - Fronius Robacta Reamer X-Line J Operating Instructions Manual

Always integrate the device into a higher-level safety system in a secured area.
If this area has to be accessed for preparatory or maintenance work, ensure that
-
-
If untrained operating personnel have access to the device, the compressed air supply to
the device must be disconnected for the duration of this access in accordance with "Per-
formance Level d" of ISO 13849-1.
In addition to these Operating Instructions, the safety rules of the robot manufacturer
must be followed.
The human body, and, in particular, hands, face and hair, plus items of clothing and all
tools, must be kept away from moving components, such as:
-
-
-
-
Do not touch the cleaning cutter immediately after operation - burning hazard. Follow the
special safety regulations for handling the cleaning cutter in the Operating Instructions.
Protect hands, face and eyes from flying parts (chips, etc.) and compressed air/parting
agent mixture discharged from the parting-agent injection nozzle.
Covers must only be opened/removed during maintenance, installation and repair work.
During operation:
-
-
Personal Protec- You are exposed to numerous hazards while handling the device. In addition to these
tion and Protec- Operating Instructions, the safety rules of the manufacturer of the entire welding system
tion of Others must be followed.
Keep persons, especially children, away during the operation of the devices and during
the welding process. However, if persons are in the vicinity:
-
-
-
EMC Device Clas- Devices in emission class A:
sifications -
-
Devices in emission class B:
-
EMC device classification as per the rating plate or technical data.
the entire system is shut down for the duration of access to this area
and remains shut down to prevent unintended operation, e.g., as a result of a control
error.
the rotating cleaning cutter
the cleaning motor that moves up and down
the gas nozzle clamping device that moves in and out
Wire cutter
ensure that all covers are closed, and all side parts have been mounted properly
keep all covers closed
instruct them about all hazards (crush hazard posed by moving mechanical parts,
injury hazard from the cleaning cutter, flying chips or similar, discharged compressed
air/parting agent mixture, injury hazard due to flying sparks, blinding hazard due to
arcs, welding fume hazardous to health, noise exposure, possible hazard due to
mains current or welding current, etc.)
Provide suitable protective equipment, or
construct suitable protective walls and curtains.
Are only designed for use in industrial settings
Can cause line-bound and radiated interference in other areas
Satisfy the emissions criteria for residential and industrial areas. This is also true for
residential areas in which the energy is supplied from the public low-voltage grid.
7