Cleaning Program Sequence; Safety - Fronius Robacta Reamer X-Line J Operating Instructions Manual

Cleaning Program Sequence

Safety

Danger due to improper installation and commissioning.
This can result in damage to property.
▶
▶
NOTE!
If wetting agent has not been applied to the inside of the welding torch, this may
lead to the permanent contamination of the welding torch when welding begins.
▶
46
CAUTION!
The cleaning device's functions must be manually checked before starting automatic
operation.
Only start automatic mode once the cleaning device has been installed and commis-
sioned properly.
Always wet the inside of the welding torch with the manufacturer's parting agent
before starting an automatic mode.