Screwing the Cleaning Device to the Solid Surface
Screwing the
NOTE!
cleaning device
and work stand
Depending on the surface (foundation), different mounting materials may be
to the surface
required to assemble the work stand.
The mounting materials for the work stand are not part of the scope of supply for the
work stand. The installer is responsible for selecting the proper mounting materials.
1
2
NOTE!
Use the mounting material delivered with the cleaning device to screw the clean-
ing device to the work stand.
3
5
32
Position the work stand on a level, solid and vibration-free surface (foundation)
-
Position the work stand so that the robot's approach route to the cleaning device
on the work stand is as short as possible
Tightly screw the work stand to the surface (foundation) using the selected mounting
materials
4