Line; Logoff; Lsr - Ericsson HL950 Administrator's Manual

6.1.12

LINE

Used to add or remove a specified string of text from the startup script or from a specified file
[filename].
Authority: ADMIN
Syntax:
> [add|del] line "string to add" [filename]
Parameter(s):
add
del
string to add
filename
Example:
/user/>add line "this is a test: hello world" sample.log
6.1.13

LOGOFF

Logs the user off the HL950. You are not prompted to verify that you want to logoff.
Authority: EVERYONE
Syntax:
>logoff
Parameter(s):
Example:
6.1.14 LS
Generate a brief listing of the content of a directory. Unlike its Unix counterpart, this command does
not take any arguments.
When you log off the HL950 and then log on again, you will return to the directory level setting of the
previous session.
Authority: EVERYONE
Syntax:
>ls
Parameter(s):
Example:
*/root*>ls
6.1.15

LSR

From the level of the prompt, lists the contents of a directory and all of its subdirectories.
Authority: EVERYONE
Syntax:
>lsr
Parameter(s):
Example:
*/root*>lsr
Page 97 (159)
Appends the specified string of text to the start up script or to the
end of the specified file.
Deletes the specified string of text from the start up script or from
the specified file.
Specifies the text change to be made.
Specifies the file to be modified. If the file does not exist, the
system will create it. If you do not specify a file name, lines are
added to the file startup.scr. The HL950 automatically runs this
start up script file every time the HL950 boots.
Multi Service Edge Device HL950
Administrator's Guide
EN/LZT 108 5995 R3
June 2003