Service Commands And Parameters; Dhcp; Nfs - Ericsson HL950 Administrator's Manual

6.7

SERVICE Commands and Parameters

6.7.1

DHCP

Used for controlling the DHCP (Dynamic Host Control Protocol) daemon.
Authority: EVERYONE
Prefixes Parameters and Descriptions
IF<STR>: Interface name for DHCP server
SET
SCOPE<STR>: Scope name
SHOW
ADD ADDR<IP>: Range Network address. Default: Interface network number
DEL
MASK<IP>: Range Network mask. Default: Interface network mask
START
STOP
RANGE<STR>: IP Range Name
IPSTART<IP>: Start IP address range
IPEND<IP>: End IP address range
OPTION<NUM>: Option number (from RFC2132)
OPTVAL<STR>: Option value (from RFC2132)
PARAMNAME<STR>: DHCP Server Parameter (DEFTIME, MAXTIME, BPCUFOF,
BPLEN, BPFNAME, SVRDNM, NXTSVR, BUNC, ADBOOTP, ABOOTC, or ABOOTP)
PARAMVAL<STR>: Parameter value; time in seconds.
SMAC<STR>: MAC Address for static host
SIP<IP>: IP Address for static host
SNAME<STR>: Name for static host
RELAY<BOOL>: Enable or Disable DHCP relay on interface
DHCPSRV<STR>: External DHCP server for relay, e.g. 192.168.2.160 or abc.ericsson.com
BOOTSRV<STR>: External Bootp server for relay e.g. 192.168.2.160 or abc.ericsson.com
OPTIONS<BOOL>: Whether to display all options (need interface name), e.g. DNS name
PARAM<BOOL>: Whether to display all parameters (need interface name), e.g. lease time
HOST<BOOL>: Whether to display all static host information
LEASE<BOOL>: Whether to display lease information
LEASEIP<IP>: Display lease details for given IP address
OPTLIST<BOOL>: Whether to display RFC2132 option information
ALL<BOOL>: Whether to display/delete all
6.7.2

NFS

Used to manually mount additional NFS (Network File System) systems.
Authority: EVERYONE
Prefixes Parameters and Descriptions
IP<IP>: Specifies the IP address of the NFS server
SHOW
DIR<STR>: Specifies the file system directory on NFS server
START
STOP
DEV<STR>: Specifies the local name of the NFS drive
Page 119 (159)
Multi Service Edge Device HL950
Administrator's Guide
EN/LZT 108 5995 R3
June 2003