Ericsson HL950 Administrator's Manual page 113

Multi Service Edge Device HL950
Administrator's Guide
SNMARGIN<NUM>: Next start margin
TEST<BOOL>: Perform self test on startup
BERT<STR>: Perform bit-error-rate test. Valid values are TXSTART, RXSTART, and
STOP.
STATUS<BOOL>: Whether to display the interface status
FSTATS<BOOL>: Whether to display the framer statistics
CFG<BOOL>: Whether to display configuration settings
EOC<BOOL>: Enable or disable EOC
LOOP<STR>: Specifies the loop back action. Valid values are REMOTE, ANALOG,
DIGITAL, and OFF.
The DSLAM uses the EOS (Embedded Operations Channel) to interrogate the HL950 for
performance data, software version levels, etc.
Page 113 (159) EN/LZT 108 5995 R3
June 2003