Link; Qualgp; Stats - Ericsson HL950 Administrator's Manual

6.4.5

LINK

Used to configure GoS links
Authority: ADMIN
Prefixes Parameters and Descriptions
LK<NUM>: Link number. Default: Last used
SET
DIR<STR>: Link direction; ltw (lan to wan) or wtl (wan to lan). Default: ltw
SHOW
ADD
IF<STR>: Outgoing interface for the link; eth0, wan0 etc. Default: wan0 for ltw links, eth0
DEL
for wtl links.
MAXRATE<NUM>: Max rate in bits per second (bps) to allow for the link
6.4.6

QUALGP

Used to configure GoS quality groups
Authority: ADMIN
Prefixes Parameters and Descriptions
LK<NUM>: Link number
SET
QG<STR>: GoS Quality Group; A1, A2, A3, B1, B2, B3, C1, C2, C3, or BE
SHOW
DEL
TYPE<STR>: Quality Group type; POLICED or CAR. Default: POLICED
RATE<NUM>: Rate as a percentage of MAXRATE for a Quality Group
BURST<NUM>: Burst rate as a percentage of uncommitted bandwidth for a Quality Group
6.4.7

STATS

Used to display and reset GoS statistics
Authority: ADMIN
Prefixes Parameters and Descriptions
LK<NUM>: Link number. Default: Last used
SHOW
NAME<STR>: Name of GoS entry
QG<STR>: GoS Quality Group; A1, A2, A3, B1, B2, B3, C1, C2, C3, or BE
RESET<BOOL>: Whether to reset the statistics
Page 109 (159)
Multi Service Edge Device HL950
Administrator's Guide
EN/LZT 108 5995 R3
June 2003