Multi Service Edge Device HL950
Administrator's Guide
4. Show all CESoIP sessions:
HL950> show ces ip
5. Start the line interface (LIF):
HL950> start interface line x1
6. Start the CESoIP session:
HL950> start ces ip:name=<name>;
HL950> save (to store the auto-start configuration)
7. Show CESoIP statistics/status:
HL950> show ces ip:name=<name>, stats=yes;
8. To turn on tagging for CES traffic:
HL950> set service qos:serv=ces, port=<port number>, tos=<tos
number>,cos=<cos number>;
Where PORT allows you to specify a port number for QoS instead of a service.
EN/LZT 108 5995 R3
June 2003
Page 42 (159)