Command Structure; Main Commands; Commands For Functions And Services - Ericsson HL950 Administrator's Manual

Multi Service Edge Device HL950
Administrator's Guide
3.2

Command Structure

The HL950 Command Line Interface allows HL950 administrators to set up, configure and manage
HL950 devices. It also allows HL950 non-privileged users to view the current status of the HL950 but
not to make changes to the system.
For a detailed description of all CLI commands, including authority, available prefixes and
parameters, see chapter 6 "CLI Commands".
3.2.1

Main Commands

The Main Commands are primarily related to the HL950 operating system and are as follows:
Main commands:
CAT CD
FLASHLED FLUSH
LSR MKDIR
RELOAD RM
WHOAMI WHOISON
3.2.2

Commands for Functions and Services

The commands for functions and services are divided into three parts; Prefixes, Subgroups and
Elements. The command convention is a combination of "prefix-subgroup-element" followed by a
number of parameters and their values.
3.2.2.1 Command Prefixes
There are eight command prefixes as follows:
SET – sets configuration values.
!
SHOW – displays configuration values.
!
ADD – adds objects.
!
DEL – deletes objects and their values.
!
START – starts the object designated by the command's subgroup-element modifiers. (Once
!
you start services and interfaces, they will start automatically upon system restart).
STOP – halts the object designated by the command's subgroup-element modifiers.
!
HELP – displays available commands. When used alone, you see the help system for the
!
HL950. When you use HELP as a prefix to a command, you see the help for that command.
EN/LZT 108 5995 R3
June 2003
CHKDSK CLS
FORMAT FTP
MV PASSWORD
RMDIR SAVE
XCP XRM
Figure 5
Main Commands for the HL950 CLI
CONFIG CP
LINE LOGOFF
PING PWD
TAR TFTP
EXIT
LS
QKEY
UPGRADE
Page 20 (159)