Sntp - Ericsson HL950 Administrator's Manual

LOCATION<STR>: Sets the system.sysLocation in MIB-II
VCNAME<STR>: Specifies the VPI/VCI pair for SNMP communication
EVCC<BOOL>: Enable or Disable VCC pair for SNMP communication
TOATM<BOOL>: Enable or Disable Traps over ATM (AAL5)
The following example shows the details for SNMP:
HL950> show service snmp
SNMP Daemon:
------------
SNMP Daemon: Running
SNMP Agent:
-----------
Version Trap: SNMPv1
Port#: 161
Get Community: public
Set Community: private
SNMP Notification:
------------------
Trap: Disabled
Destination IP: 127.0.0.1
Port#: 162
Community: trapcmty
Authentication Trap: Disabled
SNMP Over ATM:
--------------
SNMP VCC: Not Running
ATM VCC: Disable
VC Name: SNMPVC
Traps Over ATM: Disable
General Information:
--------------------
Contact: Ericsson
Name: Support
Location: Silicon Valley
EXECUTED [0]
HL950>
6.7.6

SNTP

Used to control the SNTP (Simple Network Time Protocol) client.
Authority: EVERYONE
Prefixes Parameters and Descriptions
ENABLE<BOOL>: Whether to use Simple Network Time Protocol
SET
SERVER<STR>: Address of the SNTP server
SHOW
GMT<STR>: GMT timezone offset
Page 121 (159)
Multi Service Edge Device HL950
Administrator's Guide
EN/LZT 108 5995 R3
June 2003