Security Commands And Parameters; Access; Alg; Certificate - Ericsson HL950 Administrator's Manual

Multi Service Edge Device HL950
Administrator's Guide
6.6

SECURITY Commands and Parameters

6.6.1

ACCESS

Used to manage system access settings.
Authority: ADMIN
Prefixes Parameters and Descriptions
WEBLAN<BOOL>: Enable or disable Web login from LAN
SET
PINGLAN<BOOL>: Enable or disable Ping from LAN
SHOW
FTPLAN<BOOL>: Enable or disable FTP from LAN
TELLAN<BOOL>: Enable or disable Telnet from LAN
WEBWAN<BOOL>: Enable or disable Web login from WAN
PINGWAN<BOOL>: Enable or disable Ping from WAN
TELWAN<BOOL>: Enable or disable Telnet from WAN
WEBDMZ<BOOL>: Enable or disable Web login from DMZ
PINGDMZ<BOOL>: Enable or disable Ping from DMZ
TELDMZ<BOOL>: Enable or disable Telnet from DMZ
6.6.2

ALG

Used to manage ALGs (Application Level Gateways).
Authority: ADMIN
Prefixes Parameters and Descriptions
NAME<STR>: ALG Name
SHOW
START
STOP
6.6.3

CERTIFICATE

Used to control the Certificate service.
Authority: ADMIN
Prefixes Parameters and Descriptions
NAME<STR>: Unique certificate name
SET
TYPE<STR>: Certificate type (CA, SG, or REQ)
SHOW
ADD
CID<STR>: Certificate identifier (mandatory)
DEL
DEPT<STR>: Department name
ORG<STR>: Organization name
CITY<STR>: City name
STATE<STR>: State name
CCODE<STR>: Country code
PCODE<STR>: Postal (Zip) code
EMAIL<STR>: Identity: e-mail address
DNS<STR>: Identity: DNS Domain name
IP<IP>: Identity: IP Address
SIG<STR>: Signature and hash algorithm (RSAMD5, RSASHA1, or DSASHA1)
KLEN<NUM>: Key length (512, 1024, or 2048)
EN/LZT 108 5995 R3
June 2003
Page 114 (159)