Replacing The Fuse; Replacing The Display - Weinmann homecare SOMNOcomfort 2 Servicing And Repair Instructions

7.8 Replacing the fuse

1. Open the unit (chapter 7.4, page 23).
2. Remove the defective fuse and replace with a
new one.
Ensure the correct amperage is used.
Use fuses mentioned in the Replacement parts list
only. Using other fuses may cause damage to the
main circuit board.
3. Close the unit (chapter 7.5, page 24).
4. Check that everything is working properly
(chapter 5., page 15).

7.9 Replacing the display

1. Open the unit (chapter 7.4, page 23).
2. Remove the main circuit board (chapter 7.6,
page 25, steps to
1.
Remove the display
1. Loosen the two screws
2. Remove the decoupling tube
).
5.
.
71
from the box.
50
SOMNOcomfort 2/SOMNOcomfort 2e
77
SOMNObalance/SOMNObalance e
76
71
50
Repair information and repair instructions
27