Closing The Unit - Weinmann homecare SOMNOcomfort 2 Servicing And Repair Instructions

7.5 Closing the unit

1. Hold the lower part of the housing
upper part at an angle
2. Attach connector
X1
. When doing so the connector's nub has to
44
point towards the lock.
3. Properly align the main circuit board
the unit.
4. Attach the connecting cable
5. Place the lower part of the housing
upper part at .
47
Please make sure the main circuit board is
aligned properly 44 and that the connecting line
64 is not being squeezed in anywhere.
6. Now reattach the upper part of the housing by
tightening the six screws
7. Insert the covering cap.
24
Repair information and repair instructions
to the
48
.
47
to the main circuit board
inside
44
to its mount.
64
on the
48
.
70
SOMNOcomfort 2/SOMNOcomfort 2e
64
X1
44
SOMNObalance/SOMNObalance e
64
X1
48
47
48
44 47
70