Reset Service Symbol; Disposal - Weinmann homecare SOMNOcomfort 2 Servicing And Repair Instructions

3.3 Reset service symbol

After every servicing and hygienic preparation the display's service symbol
to reset the service indicator back to 0 hours.
1. To delete the service symbol, ensure the unit is
switched off and press and hold softstart
button until the setting option for Automatic
20
on/off (SOMNOcomfort 2/
SOMNOcomfort 2e) or the SoftPAP stage
(SOMNObalance/SOMNObalance e)
appears.
2. Now, additionally press the on/off switch
until an S (for "key") appears.
3. Now release both buttons.
4. SOMNOcomfort 2/SOMNOcomfort 2e:
By pressing the on/off switch briefly
servicing indicator can be set and deleted.
SOMNObalance/SOMNObalance e:
Briefly pressing on/off switch
servicing code to be set. It is deleted by
pressing softstart button
5. Additionally, a new servicing label should be
attached at the rear of the unit.
SOMNOcomfort 2/SOMNObalance:
Current year + 2
SOMNOcomfort 2e/SOMNObalance e:
Current year + 4.

3.4 Disposal

Do not dispose of the unit as domestic waste. To dispose of the unit properly, please contact a
licensed and certified electronic waste disposal merchant. Names and addresses can be obtained
from your Environmental Officer or municipal authorities.
12
Servicing
,
19
the
19
allows the
19
.
20
will have to be reset in order
14
20 19