Configuring Sip Sessions And Media Services - Dialogic BorderNet 500 Installation And Configuration Manual

® ™
Dialogic BorderNet 500 Gateways Installation and Configuration Guide
6. In the Internal SIP Card section, set the IP Address field to the IP address in the Network Interfaces section
of the SIPcontrol configuration screen, and set the RTP Media port region values to the RPT start port and
RTP end port values in the Network Interfaces section of the SIPcontrol configuration screen. For example:
7. Click Save to save the setting. This setting must also be applied on the Save/Load Configuration page before
it affects SIParator functionality. For information, see

Configuring SIP Sessions and Media Services

To configure SIP sessions and media services, follow these steps:
1. Click SIP Services on the main menu of the SIParator web interface.
The SIP Services page appears.
2. Click Sessions and Media on the SIP Services page:
3. In the Local Ringback section, verify that the Play local ringback when new target rings option is selected.
For example:
4. Click Save to save the setting. This setting must also be applied on the Save/Load Configuration page before
it affects SIParator functionality. For information, see
Page 28
Applying the SIParator Configuration
Applying the SIParator Configuration
on page 35.
on page 35.