Configuring SIP Interoperability
You can adjust the SIParator's SIP configuration to make allowance for known issues in various SIP
implementations by configuring SIP interoperability.
To configure SIP interoperability, follow these steps:
1. Click SIP Services on the main menu of the SIParator web interface.
The SIP Services page appears.
2. Click Interoperability on the SIP Services page:
The SIP interoperability options appear.
3. Verify that the following options are set to Yes:
• Force Record-Route for outbound requests
• Always force Record-Route
For example:
4. Click Save to save the settings. These settings must also be applied on the Save/Load Configuration page
before they affect SIParator functionality. For information, see
page 35.
Configuring SIP Interoperability
Applying the SIParator Configuration
on
Page 29