Activating Licenses; Device Unique Id (Duid) - Dialogic BorderNet 500 Installation And Configuration Manual

Activating Licenses

Licenses are available from Dialogic for following extensions:
• Additional SIParator SIP traversal licenses
• SIParator Remote SIP Connectivity module
• SIParator Quality of service Module
• SIParator Enhanced Security Module
• SIParator VoIP Survival Module
• SIParator SIP Registrar Module
• Fax license for the Diva Media Board, enabling Fax/T.38 Gateway functionality
• G.729 license for the Diva Media Board, enabling G.729 codec support in the Gateway
To activate your license, you need the Device Unique ID (DUID) and the Proof of Purchase Code (PPC), as
described below. Once you have both the DUID and the PPC, visit the Dialogic
your PPC together with the DUID, and you will receive your license file. Activate this license file in the Dialogic
®
Diva web interface. For more information about the license activation, see
® ®
Dialogic Diva Media Board extension

Device Unique ID (DUID)

The DUID binds the license for the SIParator extensions and the license for the Diva Media Board extensions
(BorderNet 504PRI only) to the BorderNet 500 Gateway.
The DUID for the SIParator extensions is the BorderNet 500 Gateway equipment's serial number, which can be
found either on the chassis label or on the SIParator web interface. To find the DUID on the SIParator web
interface, follow these steps:
1. Start a web browser and open https://<BorderNet500-IP-Address>/.
2. Log in using the user and password for the SIParator web interface.
The DUID is listed as a serial number on the About tab.
3. Select the serial number, right-click, and select Copy from the pop-up menu.
4. If you need to activate the license from another computer, open an editor, paste the DUID, and save the file.
5. Register the DUID on the web, as described in
The DUID for the Diva Media Board extensions (available only for BorderNet 504PRI) can be found on the Diva
SIPcontrol web interface by following these steps:
1. Start a web browser and open https://<BorderNet500-IP-Address>/ to access the Diva SIPcontrol web
interface.
2. Log in using the password for the Diva SIPcontrol web interface. The default password is "Dialogic".
Note: If you forgot your password, you can reset it by executing a "Diva configuration reset" for the
BorderNet 500 Gateway, as described in the Dialogic
on page 21.
Registering your PPC and DUID
®
BorderNet™ 500 Gateways Reference Guide.
Activating Licenses
® ®
Diva Activation site to register
Activating the license file for a
on page 20.
®
Page 19