Removing The Starter Motor - APRILIA ETX 150 Service Station Manual

Engine

Removing the starter motor

The removal and installation of the starter motor
can be carried out even if the motor is installed on
the frame:
•
Remove the locking nut (1) of the sup-
ply cable (2)
•
Remove the two fixing screws (3),
making sure to collect the rubber
spacer washers (4)
•
Remove the starter motor (5) and if
necessary replace the sealing gasket
(6)
Removing the idle gear
•
Remove the three fixing screws (1) of
the intermediate gear cover (2)
ENG - 72
ETX - STX 150