Christie TruLife+ Griffyn 4K32-RGB Technical Reference page 8

2. Use the down arrow to select Baud Rate.
3. Select the appropriate baud rate and select Enter.
4. Use the down arrow to select Network Routing.
5. Select the type network routing appropriate for your projector and select Enter.
Setting up the Ethernet
Ethernet is setup to obtain an IP address automatically if a DHCP server is on the network, modify IP
settings, or manually enter an address.
Christie recommends using the Ethernet port on the Video Input panel as the HDBaseT port is limited
to 100 Mb/s.
You cannot change the IP settings using the web interface.
1. From the display panel, use the arrow keys to select IP Settings.
2. To set the type of network, select DHCP or Static.
3. If you selected Static, manually enter the network information for the IP Address, Subnet,
and Gateway.
4. Select Apply and select Enter.
5. Select MENU > Communications > Network Settings.
6. Select Device name.
7. Use the up and down keys to enter the name of the projector.
8. Select Enter.
Understanding message format
Commands sent to and from Christie TruLife+ are formatted as simple text messages consisting of a
three letter command code, an optional four letter subcode, and optional data.
Source Format
From controller (Code Data)
(Code+Subcode
Data)
(Code ?)
(Code+Subcode ?)
From projector (Code Data)
(Code+Subcode
Data)
Generally, most commands include 0 or 1 data fields or parameters. Where applicable, a message may
expand to include additional parameters of related details.
Christie TruLife+ Technical Reference–Serial Commands
020-103316-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Function
SET (set power on)
SET (set input port configuration)
REQUEST (what is current power
state?)
REQUEST (what is current input port
configuration?)
REPLY (power state is 1 "On")
REPLY (input port configuration is 1
"One-Port")
Communicating with Christie TruLife+
Example
(PWR1) or (PWR 1)
(SIN+PORT 1)
(PWR?) or (PWR ?)
(SIN+PORT?)
(PWR!001 "On")
(SIN+PORT!001 "One-
Port")
8