Christie TruLife+ Griffyn 4K32-RGB Technical Reference page 31

EVT–Event Manager
Retrieves a list of log messages for the current AC cycle from the projector.
Commands
Command Description
EVT Returns all events starting from the most
recent event on the projector back to AC
start. (Read-only)
EVT <max> Returns a set number of events starting
from the most recent event on the projector
going back to AC start. (Read-only)
EVT <start Returns all events from <start timestamp>
timestamp> back to current time. (Read-only)
EVT <start Returns all events between two specific
timestamp> <end timestamps. (Read-only)
timestamp>
Examples
Retrieve all events since last AC start:
(EVT)
Result:
(EVT!000 "2013-03-17 04:47:18.340" "OK" "Setting Time to 06:47:17")
(EVT!002 "2013-03-17 04:01:13.855" "Error" "(SST+TEMP?002) Air Intake Temperature
(Temp 2) = Communication fault (shutdown)")
(EVT!003 "2013-03-17 04:01:13.824" "Error" "(SST+TEMP?000) Integrator Rod Temperature
(Temp 1) = Communication fault (shutdown)")
(EVT!"--END--")
Retrieve two most recent events:
(EVT 2)
Result:
(EVT!002 "2013-03-17 04:01:13.855" "Error" "(SST+TEMP?002) Air Intake Temperature
(Temp 2) = Communication fault (shutdown)")
(EVT!000 "2013-03-17 04:47:18.340" "OK" "Setting Time to 06:47:17")
(EVT!"--END--")
Retrieve all events from a specific point in time until now:
(EVT "2013-03-17 04:01:13")
Christie TruLife+ Technical Reference–Serial Commands
020-103316-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
max = Maximum number of events to
return
start timestamp = String in the following
format:
yyyy = mm-dd hh:mm:ss
start timestamp = String in the following
format:
yyyy = mm-dd hh:mm:ss
end timestamp = String in the following
format:
yyyy = mm-dd hh:mm:ss
31