Christie TruLife+ Griffyn 4K32-RGB Technical Reference page 55

SZP–Resize Presets
Changes the aspect ratio of the display.
Commands
Command Description
SZP <value> Changes the aspect ratio of the display. This
command is only available if video
electronics are on. (Saved value)
Examples
Allow the projector to determine when to scale video:
(SZP 0)
Disable scaling the video:
(SZP 1)
Stretch the video horizontally:
(SZP 3)
TDD–3D Sync Delay
Configures where the sync pulse occurs in relation to the transition from on time to off time in the
DMDs, in microseconds.
Only applies to: Mirage models
Commands
Command Description
TDD? Returns the 3D emitter delay value on main
video. (Read-only)
Christie TruLife+ Technical Reference–Serial Commands
020-103316-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = Allows the projector to determine when to
scale video (Default)
1 = No resizing
2 = Full size (stretch horizontally and vertically)
3 = Full width (stretch horizontally)
4 = Full height (stretch vertically)
Values
—
55