Christie TruLife+ Griffyn 4K32-RGB Technical Reference page 16

APW–Auto Power On
Automatically powers up the projector to the on state if the projector was on when the AC power was
lost.
Commands
Command Description
APW <0 | 1> Automatically powers up the projector to the on
state. (Saved value)
Examples
Turn off auto power:
(APW 0)
Turn on auto power:
(APW 1)
Related information
PWR–Power (on page 48)
BDR–Baud Rate
Sets the baud rate for a serial communications port.
Commands
Command Description
BDR+PRTA? Returns the baud rate for the RS232-IN
port. (Read-only)
BDR+PRTA <value> Sets the baud rate for the RS232-IN port.
This command requires service level access.
(Saved value)
Examples
Verify that RS232-IN is set to 115200 bits per second:
(BDR+PRTA?)
Christie TruLife+ Technical Reference–Serial Commands
020-103316-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = Disables auto power up
1 = Enables auto power up
Values
—
1 = 2400
2 = 9600
3 = 19200
4 = 38400
5 = 57600
6 = 115200 (Default baud rate on each
port)
16