Christie TruLife+ Griffyn 4K32-RGB Technical Reference page 57

Examples
Turn off 3D processing for direct input signals:
(TDM 0)
Automatically determine whether to enable 3D processing or not:
(TDM 1)
Configure the projector to enable 3D processing where possible:
(TDM 2)
TDN–Invert 3D Input
Inverts the left and right eye frames.
Only applies to: Mirage models
Commands
Command Description
TDN <0 | 1> Inverts left and right eye frames. (Saved
value)
Enabled when the selected signal is a 3D
signal and the 3D mode is enabled.
Examples
Return the 3D input inversion value on main video:
(TDN?)
Set 3D input inversion to inverted on main video:
(TDN 0)
TDO–3D Sync Out
Configures the 3D Sync OUT port for either an emitter or for another downstream projector.
Only applies to: Mirage models
Commands
Command Description
TDO? Returns the 3D Sync Out value on main
video. (Read-only)
TDO <0 | 1> Configures the 3D Sync OUT port. (Saved
value)
Christie TruLife+ Technical Reference–Serial Commands
020-103316-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = Leaves the left and right eye frames in
their default order (Default)
1 = Reverses the order of the left and right
eye frames
Values
—
0 = Configures the 3D Sync OUT port to be
fed directly to a 3D emitter, including any
57