Christie TruLife+ Griffyn 4K32-RGB Technical Reference page 63

Asynchronous
messages
The projector can generate some asynchronous messages.
The following lists examples of each message, including why and when they are generated. Bolded
and underlined text indicates a fixed part of the message.
Type Message
Date/Time (65535 00000 FYI00916 "Setting Date to
2018/05/20")
(65535 00000 FYI00916 "Setting Time to
00:00:00")
Factory (65535 00000 FYI00919 "All settings have
defaults been restored to their factory defaults. Reboot
is required to take effect.")
Networking (65535 00000 FYI00915 "Configured
network: IP:192.168.228.6
Mask:255.255.252.0
Gateway:192.168.228.1")
Status (65535 00000 FYI00000 "(SST+LAMP?001)
Lamp Hours = 00:00 (h:m)")
(65535 00000 ERR00000 "System Warning:
(SST+LAMP?001) Lamp Hours = N/A")
(65535 00000 ERR00000 "System Error:
(SST+VERS?003) Image Processor HW Version
= Detection Fault")
Christie TruLife+ Technical Reference–Serial Commands
020-103316-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Generated when the date or time are changed,
respectively.
Generated when a factory default has been
performed on the projector.
Generated when the network settings have
changed. Network settings can change due to a
number of specific events such as:
• Operator changes the network settings
(through any of the standard interfaces).
• DHCP lease is renewed.
• Network cable was unplugged or plugged in.
Generated when a status item changes from:
• An error or warning state to an OK state.
• An OK or error state to a warning state.
• An OK or warning state to an error state.
63