Christie TruLife+ Griffyn 4K32-RGB Technical Reference page 58

Command Description
Enabled when the selected signal is a 3D
signal and 3D mode is enabled.
Examples
Return the 3D Sync Out value on main video:
(TDO?)
Set 3D Sync Out to Off on main video:
(TDO 0)
Set 3D Sync Out to To Emitter:
(TDO 1)
Related information
TDD–3D Sync Delay (on page 55)
TDN–Invert 3D Input (on page 57)
TDT–3D Test Pattern
Enables or disables a 3D test pattern.
Only applies to: Mirage models
Commands
Command Description
TDT <0 | 1> Enables or disables the 3D test pattern.
Examples
Disable 3D test pattern:
(TDT 0)
Enable 3D test pattern:
(TDT 1)
Christie TruLife+ Technical Reference–Serial Commands
020-103316-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
3D sync delay and/or sync inversion
(Default)
1 = Configures the 3D Sync OUT port to be
fed to another downstream projector,
without including any 3D sync delay or
inversion
Values
0 = Disables the 3D test pattern
1 = Enables the 3D test pattern
58